Powderless DTF Printer

Powderless DTF Printer

No-powder DTF printing from CobraFlex. Get notified first, and shop our DTF printers, inks and film today.

Coming Soon

The CobraFlex No Powder DTF Printer

CobraFlex is developing a powderless (no-powder) DTF printer. It is coming soon and is not available to order yet. Join the list and our team will contact you first with release details and pricing.

Get Notified   Shop DTF Printers Available Now

No powderNo adhesive powder step
Fewer stepsFrom printer to heat press
Cleaner shopNo loose powder to handle
CobraFlex supportTempe, AZ team for setup, training and parts

Powderless DTF Printing vs. Standard DTF Printing

Standard DTF prints your design on DTF film, applies adhesive powder in a powder shaker, and cures it in a dryer before the transfer is pressed. Powderless DTF removes the adhesive powder step from that workflow.

That means fewer steps between the printer and the heat press, and no loose adhesive powder to handle in your shop.

The CobraFlex powderless DTF printer is coming soon. Until it launches, every CobraFlex DTF printer ships with the support, DTF inks, film and replacement parts you need to produce transfers today.

No-Powder DTF Transfer Heat Press Settings

From the CobraFlex No-Powder How-To Guide. Do not use a PTFE sheet on the upper heating platen. Let every transfer cool completely, then peel slowly at a 45° angle.

FabricTemperaturePressureTimeSecond press
100% Cotton / 50-50 Blend345°F (174°C)Firm40 seconds15 seconds
Tri-Blends 50/50345°F (174°C)Firm to medium20 seconds10 seconds
100% Polyester345°F (174°C)Medium10-12 seconds5 seconds

Peel: very cold peel for every fabric. See all heat pressing FAQs.

Powderless DTF Printer FAQs

A powderless (no-powder) DTF printer makes DTF transfers without the separate adhesive powder step. In standard DTF printing, every print goes through a powder shaker and dryer before it is pressed. Powderless DTF removes that powder step.

Yes. No powder DTF printer, powderless DTF printer and DTF printer with no powder all describe the same thing: a DTF printer that makes transfers without the separate adhesive powder step.

Pricing for the CobraFlex powderless DTF printer will be announced at launch. It is coming soon. Join the list to get pricing first, or compare DTF printer package prices available today.

Not yet. The CobraFlex powderless DTF printer is coming soon. Join the list and our team will contact you first with release details and pricing.

CobraFlex DTF printers are available now in 13", 24" and 63" widths, plus UV DTF printers. DTF printer packages include a powder shaker and dryer, start-up supplies and installation. See the printers above or ask our team.

CobraFlex no-powder transfers press at 345°F (174°C): 40 seconds on 100% cotton and 50/50 blends, 20 seconds on tri-blends, and 10-12 seconds on 100% polyester, followed by a very cold peel and a short second press. See the full settings table above.

Use DTF inks and DTF film made for your printer. CobraFlex stocks American-made DTF inks in CMYK and White, DTF film and DTF powder for every CobraFlex printer.

Coming Soon

Get Notified: CobraFlex Powderless DTF Printer

The CobraFlex powderless DTF printer is coming soon. Be first in line: we will contact you with release details and pricing.